Setting Change Function
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
The settings of the automatic drive positioner system can be changed using CONSULT-II and the display in the center of the instrument panel.
SETTING CHANGE FUNCTION CHART
| x: Applicable -: Not applicable | |||||||
|---|---|---|---|---|---|---|---|
| Setting item | Content | CONSULT-II (WORK SUPPORT) | Display unit | Default setting | Factory setting | ||
| SEAT SLIDE VOLUME SET |
The distance at exiting operation can be selected from the following 3 modes. | 40 mm | - | x | x | ||
| 80 mm | - | - | |||||
| 150 mm | - | - | |||||
| Sliding Front Seat When Entering/Exiting Vehicle | The seat sliding and return at entry/exit can be selected: ON (operated)-OFF (not operated) | ON | ON: Indicator lamp ON | - | x | ||
| OFF | OFF: Indicator lamp OFF | x | - | ||||
| Reset custom settings(1) | Returns all settings to default. | - | Default: Setting button ON | - | - | ||
|
|||||||