CAN Communication Line Check (With Color Display)

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

CHECK MONITOR DESCRIPTION
1. Start display control unit self-diagnosis. Refer to "SELF-DIAGNOSIS MODE (DCU) ".
2. Select "CAN DIAG SUPPORT MONITOR". Refer to "CAN DIAG SUPPORT MONITOR ".
  : GO TO "CAN SYSTEM SPECIFICATION CHART " after checking the state of "CAN DIAG SUPPORT MONITOR" displayed on the screen.
  
  Fig 1: Self-Diagnosis Screen Display - CAN DIAG SUPPORT MONITOR