LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2064 (Continuously Variable Transmission (CVT)) >> Shift Control System >> Adjustment of CVT Position
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Adjustment of CVT Position

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the parking brake.
    CAUTION: Make sure the vehicle cannot move with parking brake set.
  2. Loosen the control cable nut and place the manual lever in "P" position.
    Fig 1: Identifying Control Cable, Manual Lever And Nut
    G04916221Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Place the selector lever in "P" position.
  4. Push the control cable in with a load of 9.8 N (approximately 1 kg, 2.2 lb). Release the cable and temporarily tighten the control cable nut.
    NOTE: Do not move the manual lever. Make sure the manual lever stays in the "P" position.
  5. Tighten the control cable nut.
    CAUTION: Secure the manual lever when tightening nut.

    Control cable nut: Refer to  "CONTROL CABLE COMPONENTS ".

  6. Check the operation of the CVT. Refer to "CHECKING OF CVT POSITION ".
scientia non olet · About LEMON Manuals