Cylinder Block

WARNING: This page is about a different car, the 2004 Nissan Murano and 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

Grade No. 1

3.7598-3.7602 (95.500-95.510)

Grade No. 2

3.7602-3.7606 (95.510-95.520)

Grade No. 3

3.7606-3.7610 (95.520-95.530)

Maximum Taper

.0006 (.015)

Maximum Out-Of-Round

.0006 (.015)

Maximum Deck Warpage ⁽¹⁾

.004 (.10)

Main Journal Inner Diameter Grade (Without Bearing)

Journal Diameter

Grade No. A

2.5194-2.5194 (63.993-63.994)

Grade No. B

2.5194-2.5195 (63.994-63.995)

Grade No. C

2.5195-2.5195 (63.995-63.996)

Grade No. D

2.5195-2.5196 (63.996-63.997)

Grade No. E

2.5196-2.5196 (63.997-63.998)

Grade No. F

2.5196-2.5196 (63.998-63.999)

Grade No. G

2.5196-2.5197 (63.999-64.000)

Grade No. H

2.5197-2.5197 (64.000-64.001)

Grade No. J

2.5197-2.5198 (64.001-64.002)

Grade No. K

2.5198-2.5198 (64.002-64.003)

Grade No. L

2.5198-2.5198 (64.003-64.004)

Grade No. M

2.5198-2.5199 (64.004-64.005)

Grade No. N

2.5199-2.5199 (64.005-64.006)

Grade No. P

2.5199-2.5200 (64.006-64.007)

Grade No. R

2.5200-2.5200 (64.007-64.008)

Grade No. S

2.5200-2.5200 (64.008-64.009)

Grade No. T

2.5200-2.5201 (64.009-64.010)

Grade No. U

2.5201-2.5201 (64.010-64.011)

Grade No. V

2.5201-2.5202 (64.011-64.012)

Grade No. W

2.5202-2.5202 (64.012-64.013)

Grade No. X

2.5202-2.5202 (64.013-64.014)

Grade No. Y

2.5202-2.5203 (64.014-64.015)

Grade No. 4

2.5203-2.5203 (64.015-64.016)

Grade No. 7

2.5203-2.5203 (64.016-64.017)

⁽¹⁾	Maximum resurfacing limit of cylinder block and cylinder head combined is .008 In. (.20).