Setting Change Function

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

The settings of the automatic drive positioner system can be changed using CONSULT-III and the display in the center of the instrument panel.

SETTING CHANGE FUNCTION CHART

x: Applicable -: Not applicable

Setting item

Content

CONSULT-II (WORK SUPPORT)

Display unit

Default setting

Factory setting

SEAT SLIDE
VOLUME SET

The distance at exiting operation can be selected from the following 3 modes.

40 mm

80 mm

150 mm

Sliding Front Seat When Entering/Exiting Vehicle

The seat sliding and return at entry/exit can be selected: ON (operated)-OFF (not operated)

ON: Indicator lamp ON

OFF

OFF: Indicator lamp OFF

Reset custom settings⁽¹⁾

Returns all settings to default.

Default: Setting button ON

⁽¹⁾	Setting of sliding front seat for entry/exit of vehicle is ON at factory-shipment. But if custom settings are reset, setting turns OFF.