LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2138 (Engine Mechanical) >> Unit Disassembly And Assembly >> Engine Unit >> Dowel Pin Alignment >> Installation (A/T Models)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation (A/T Models)

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is in the reverse order of removal.
    • When installing the drive plate to the crankshaft, use the match mark (A) as shown to correctly align the crankshaft side dowel pin to the drive plate side dowel pin hole.
      Fig 1: Identifying Match Mark On Drive Plate
      G07152204
    • Install the drive plate and the reinforcement plate in the direction as shown.
      Fig 2: Identifying Signal Plate, Ring Gear, Pilot Converter And Crankshaft
      G07152205
    • Tighten the drive plate bolts in a diagonal pattern in two steps. Refer to "EXPLODED VIEW ".
scientia non olet · About LEMON Manuals