LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2311 (Engine Control System - DTCS P1217 To P2A03) >> DTC P2127, P2128 App Sensor >> CONSULT-II Reference Value in Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-II Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

CONSULT-II REFERENCE VALUE IN DATA MONITOR MODE

MONITOR ITEM CONDITION SPECIFICATION
ACCEL SEN 1
  • Ignition switch: ON

    (Engine stopped)

 Accelerator pedal: Fully released 0.65 - 0.87V
Accelerator pedal: Fully depressed More than 4.3V
ACCEL SEN 2(1)
  • Ignition switch: ON

    (Engine stopped)

 Accelerator pedal: Fully released 056 - 0.96V
Accelerator pedal: Fully depressed More than 4.0V
CLSD THL POS
  • Ignition switch: ON

    (Engine stopped)

 Accelerator pedal: Fully released ON
Accelerator pedal: Slightly depressed OFF
(1) Accelerator pedal position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminal voltage.
scientia non olet · About LEMON Manuals