Overall Function Check

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Use this procedure to check the overall function of the park/neutral position (PNP) switch circuit. During this check, a 1st trip DTC might not be confirmed.

WITH GST

Turn ignition switch ON.

Check voltage between ECM terminal 102 (PNP switch signal) and ground under the following conditions.

ECM TERMINAL VOLTAGE SPECIFICATION

Condition (Gear position)	Voltage V (Known-good data)
P and N position	Approx. 0
Except the above position	BATTERY VOLTAGE (11 - 14V)

Fig 1: Checking Voltage Between ECM Terminal 102 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, go to "DIAGNOSTIC PROCEDURE ."