LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Specifications & Procedures) >> Front Wheel Alignment >> Preliminary Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preliminary Inspection

WARNING: This page is about a different car, the 2003 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check tires for wear and improper inflation.
  2. Check wheels for deformation, cracks and other damage.

    If deformed, remove wheel and check wheel runout.

    1. Remove tire from wheel and mount wheel on a tire balance machine.
    2. Set dial indicator as shown in the illustration.
      Fig 1: Checking Wheels For Deformation
      G02451660Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Check front wheel bearings for looseness.
  4. Check front suspension for looseness.
  5. Check steering linkage for looseness.
  6. Check that front shock absorbers work properly.
  7. Check vehicle wheelarch height (unladen*). Refer to "SPECIFICATIONS  ".
    • *: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.