Control Device Removal And Installation: Removal
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect lower lever of control device and control rod.
- Remove console finisher.
- Refer to "INSTRUMENT PANEL ASSEMBLY" . See INSTRUMENT PANEL ASSEMBLY .
- Remove console box assembly.
- Refer to "INSTRUMENT PANEL ASSEMBLY" . See INSTRUMENT PANEL ASSEMBLY .
- Remove rear ventilator duct.
- Refer to "Removal of REAR VENTILATOR DUCTS " .
- Disconnect control device harness connector.
- Remove control device assembly.