Operation Procedure
WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
- Close hood and front door (passenger side) and then lift wiper arms away from windshield (to prevent glass damage by wiper operation).NOTE: When auto active test is performed with hood opened, sprinkle water on windshield beforehand.
- Turn ignition switch OFF.
- Turn ignition switch ON, and within 20 seconds, press drivers door switch 10 times (close other doors). Then turn ignition switch OFF.
- Turn ignition switch ON within 10 seconds after ignition switch OFF.
- When auto active test mode is actuated, horn chirps once. Oil pressure warning lamp starts blinking.
- After a series of operations is repeated three times, auto active test is completed.NOTE: When auto active test mode has to be cancelled halfway, turn ignition switch OFF.NOTE: Be sure to inspect door switch when the auto active test cannot be performed. See CHECK DOOR SWITCH .