LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 690 (Brake Control System - Sedan) >> Trouble Diagnosis >> Consult-II Functions >> Data Monitor >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
  3. Turn ignition switch ON.
  4. Touch "START" on display.
  5. Touch "ABS" on display.
    NOTE: Just after starting engine, or turning ignition switch ON, "ABS" may not be displayed on system selection screen even if "START" is touched. In this case, start again from step  1 .
  6. Touch "DATA MONITOR".
  7. Return to monitor item selection screen, and touch any of "ECU INPUT SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU". Refer to DISPLAY ITEM LIST  .
  8. Touch "START".
  9. Screen of data monitor is displayed.
scientia non olet · About LEMON Manuals