System Description: Function
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
FUNCTION CHART
| Item | Description |
|---|---|
| Ignition Key Warning Chime | Sounds Warning Chime When Driver's Door Is Opened With Key In Ignition Key Cylinder And Ignition Switch OFF Or ACC Position |
| Light Warning Chime | Sounds Warning Chime When Driver's Door Is Opened With Lighting Switch In The 1St Or 2Nd Position And Ignition Switch OFF Or ACC Position |
| Seat Belt Warning Chime | Sounds Warning Chime For About 6 Seconds If Ignition Switch Is Turned ON When Driver's Seat Belt Is Unfastened |
Power is supplied at all times:
- through 10A fuse [No. 3, located in the fuse block (J/B) NO. 1]
- to BCM terminal 105
- through 10A fuse [No. 32, located in the fuse block (J/B) NO. 2]
- to key switch and key lock solenoid (key switch) terminal 3
- through 10A fuse [No. 6, located in the fuse block (J/B) NO. 1]
- to headlamp battery saver control unit terminal 7 and
- to warning chime terminal 1
- through 15A fuse [No. 54, located in the fuse, fusible link and relay block (J/B)]
- to tail lamp relay terminals 2 and 6 [located in fuse, fusible link and relay block (J/B)].
With ignition switch in ON or START position, power is supplied:
- through 10A fuse [No. 1, located in the fuse block (J/B) NO. 1]
- to BCM terminal 68 and
- to headlamp battery saver control unit terminal 1.
Ground is supplied:
- to BCM terminals 56 and 113
- through body grounds M24 and M114.
When a signal, or combination of signals, is received by the BCM, the warning chime will sound.