Operation Procedure

WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Touch "IGN WARN ALM", "LIGHT WARN ALM" or "SEAT BELT WARM" on "SELECT TEST ITEM" screen.
Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
Touch "MAIN SIGNALS" or "SELECTION FROM MENU" on "DATA MONITOR" screen.

Fig 1: Data Monitor Item Table
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START".
If "SELECTION FROM MENU" is selected, touch the desired monitor item. If "MAIN SIGNALS" is selected, the main item required to control is monitored.
During monitoring, touching "COPY" can start recording the monitor item status.

Fig 2: Data Monitor Item Description Table (Key Warning Chime)
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Data Monitor Item Description Table (Light Warning Chime)
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Data Monitor Item Description Table (Seat Belt Warning Chime)
Courtesy of NISSAN MOTOR CO., U.S.A.