Torque Specification

WARNING: This page is about a different car, the 2003 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATION

Part tightened	N.m	kgf.cm	ft.lbf
Transmission output flange x Output shaft	126	1,280	92
Vehicle speed sensor set bolt	5.4	55	48 in.lbf
O/D direct clutch speed sensor set bolt	5.4	55	48 in.lbf
Solenoid connector set bolt	5.4	55	48 in.lbf
Solenoid wiring clamp set bolt	6.4	65	56 in.lbf
Oil strainer x Valve body	10	100	7
Oil pan x Transmission case	7.4	75	65 in.lbf
Drain plug	20	205	15
Park/Neutral position switch x Transmission case	13	130	9
Park/Neutral position switch set nut	6.9	70	61 in.lbf
Control shaft set bolt	16	160	12
Linear solenoid valve SLU, SLT x Valve body	6.4	65	56 in.lbf
Linear solenoid valve SLN x Valve body	10	100	7
Shift solenoid valve No. 1, No. 3 x Valve body	6.4	65	56 in.lbf
Shift solenoid valve No. 2, No. 4 x Valve body	10	100	7
Valve body x Transmission case	10	100	7
Parking lock pawl bracket x Transmission case	7.4	75	65 in.lbf
Heated oxygen sensor x Exhaust pipe	44	450	32
Front TWC x Exhaust pipe	43	440	32
Pipe support bracket x Transmission	43	440	32
Center floor crossmember brace x Body	13	130	9
Front TWC x Exhaust manifold	62	630	46
Engine rear mounting member bracket plate x Body	5.4	55	48 in.lbf
Heat insulator x Body	5.4	55	48 in.lbf
Propeller shaft heat insulator x Body	5.4	55	48 in.lbf
Shift control rod x Shift lever assembly	13	130	9
Shift lever assembly x Body	8.3	85	74 in.lbf
Shift lever control shaft nut	19	194	14
Shift lever guide housing x Shift lever plate	3.0	29	25 in.lbf
Oil cooler pipe union nut	44	450	32
Oil cooler pipe clamp set bolt	4.9	50	43 in.lbf
Flywheel housing under cover x Transmission housing	18	185	13
Torque converter clutch x Drive plate	48	490	35
Engine rear mounting x Body	26	270	20
Transmission x Engine 17 mm head 14 mm head	72 37	730 380	53 27
Drive plate x Crankshaft	See TORQUE CONVERTER CLUTCH AND DRIVE PLATE