LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> 350Z 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> DTC P1706: PNP Switch >> Overall Function Check >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 102 (PNP switch signal) and ground under the following conditions.
    VOLTAGE CONDITION SPECIFICATION

    Condition (Shift lever) Voltage V (Known good data)
    P or N position (A/T) Neutral position (M/T) Approx. 0
    Except above position BATTERY VOLTAGE (11 - 14V)
    Fig 1: ECM Connector Terminal 102 (PNP Switch Signal) & Ground Voltage Test
    G02402094Courtesy of NISSAN MOTOR CO., U.S.A.
  3. If NG, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals