October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Throttle Position Sensor
- Reconnect all harness connectors disconnected.
- Perform
THROTTLE VALVE CLOSED POSITION LEARNING .
- Turn ignition switch ON
- Set selector lever to D position.
- Check voltage between ECM terminals 50 (TP sensor 1 signal), 69 (TP sensor 2 signal) and ground under the following conditions.
Courtesy of NISSAN MOTOR CO., U.S.A.
- If NG, replace electric throttle control actuator and go to the next step.
Courtesy of NISSAN MOTOR CO., U.S.A.
- Perform
THROTTLE VALVE CLOSED POSITION LEARNING .
- Perform
IDLE AIR VOLUME LEARNING .