Diagnostic Procedure

1. Turn ignition switch ON.
2. Connect CONSULT-II and select "DATA MONITOR" mode.
3. Select "LOAD SIGNAL" and check indication under the following conditions.
   INDICATION CONDITION
   
   

   Condition	Indication
   Rear window defogger switch: ON	ON
   Rear window defogger switch: OFF	OFF

OK or NG 

• OK: GO TO  2.
• NG: GO TO  3.

Fig 1: CONSULT-II Display - "DATA MONITOR" Mode

Courtesy of NISSAN MOTOR CO., U.S.A.

Check "LOAD SIGNAL" indication under the following conditions.

OK or NG 

• OK: INSPECTION END
• NG: GO TO  4.

Fig 2: CONSULT-II Display - "DATA MONITOR" Mode

Courtesy of NISSAN MOTOR CO., U.S.A.

Refer to REAR WINDOW DEFOGGER .

• : INSPECTION END 

Refer to HEADLAMP (FOR USA) or HEADLAMP (FOR CANADA) - DAYTIME LIGHT SYSTEM .

• : INSPECTION END