LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Frontier XE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Qr) - Component Testing >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Clutch Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    ASCD CLUTCH SWITCH CONTINUITY SPECIFICATIONS

    Condition Continuity
    Clutch pedal: Fully released Should exist
    Clutch pedal: Slightly depressed Should not exist

    If NG, adjust ASCD clutch switch installation, refer to "CLUTCH PEDAL ", and perform step  3 again.

    Fig 1: Checking Continuity Between ASCD Clutch Switch Terminals 1 And 2
    G03593548Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals