October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Throttle Control Motor

Disconnect electric throttle control actuator harness connector.
Check resistance between terminals 3 and 6.
- Resistance: Approximately 1 - 15 Ω [at 25°C (77°F)]
If NG, replace electric throttle control actuator and go to next step.
Perform THROTTLE VALVE CLOSED POSITION LEARNING .
Perform IDLE AIR VOLUME LEARNING .

Fig 1: Checking Resistance Between Terminals 3 & 6
Courtesy of NISSAN MOTOR CO., U.S.A.