ASCD Clutch Switch

WARNING: This page is about a different car, the 2005 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector.

Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.

ASCD CLUTCH SWITCH CONTINUITY

Condition	Continuity
When clutch pedal: Fully released.	Should exist.
When clutch pedal: Depressed.	Should not exist.

If NG, adjust ASCD clutch switch installation, refer to CLUTCH PEDAL and perform step 3 again.

Fig 1: Checking Continuity Between ASCD Clutch Switch Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.