LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Front Suspension System) >> Service Information >> Service Data And Specifications (SDS) >> Wheel Alignment (Unladen*)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Alignment (Unladen*)

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS

Engine MR20DE QR25DE
Model 2.0, 2.0 S, 2.0 SL SE-R SPEC-V
Camber Degree minute (Decimal degree)(1) LH Minimum -0° 41' (-0.68°) -0° 41' (-0.68°) -0° 46' (-0.77°)
Nominal -0° 03' (-0.05°) -0° 03' (-0.05°) -0° 08' (-0.13°)
Maximum 0° 35' (0.58°) 0° 35' (0.58°) 0° 30' (0.50°)
RH Minimum -0° 55' (-0.92°) -0° 55' (-0.92°) -1° 00' (-1.00°)
Nominal -0° 17' (-0.28°) -0° 17' (-0.28°) -0° 22' (-0.37°)
Maximum 0° 21' (0.35°) 0° 21' (0.35°) 0° 16' (0.27°)
Caster Degree minute (Decimal degree)(2) LH Minimum 4° 10' (4.17°) 4° 10' (4.17°) 4° 25' (4.42°)
Nominal 4° 48' (4.80°) 4° 48' (4.80°) 5° 03' (5.05°)
Maximum 5° 26' (5.43°) 5° 26' (5.43°) 5° 41' (5.68°)
RH Minimum 4° 24' (4.40°) 4° 24' (4.40°) 4° 39' (4.65°)
Nominal 5° 02' (5.03°) 5° 02' (5.03°) 5° 17' (5.28°)
Maximum 5° 40' (5.67°) 5° 40' (5.67°) 5° 55' (5.92°)
Kingpin inclination
Degree minute (Decimal degree)
LH 10° 58' (10.97°) 10° 58' (10.97°) 11° 13' (11.22°)
RH 11° 12' (11.20°) 11° 12' (11.20°) 11° 27' (11.45°)
G04902060Courtesy of NISSAN MOTOR CO., U.S.A.
Total toe-in Distance (A - B) Minimum -1 mm (-0.04 in) -1 mm (-0.04 in) -1 mm (-0.04 in)
Nominal 0 mm (0.00 in) 0 mm (0.00 in) 0 mm (0.00 in)
Maximum 1 mm (0.04 in) 1 mm (0.04 in) 1 mm (0.04 in)
Angle (left or right, each side)
Degree minute (Degree)
Minimum -0° 02' 42" (-0.045°) -0° 02' 42" (-0.045°) -0° 02' 42" (-0.045°)
Nominal 0° 00' (0.00°) 0° 00' (0.00°) 0° 00' (0.00°)
Maximum 0° 02' 42" (0.045°) 0° 02' 42" (0.045°) 0° 02' 42" (0.045°)
*: Fuel, engine coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
(1) The LH camber angle shall be +14' ± 39' with respect to RH camber angle.
(2) The LH caster angle shall be -14' ± 39' with respect to RH caster angle.