LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2005 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Audio Visual, Navigation & Telephone System) >> Service Information >> Audio >> Steering Switch Check (With Bluetooth)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Switch Check (With Bluetooth)

WARNING: This page is about a different car, the 2009 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HARNESS
    1. Turn ignition switch OFF.
    2. Disconnect Bluetooth control unit connector B15 and spiral cable connector M30.
    3. Check continuity between Bluetooth control unit connector B15 (A) terminals 12, 13, and 14 and spiral cable connector M30 (B) terminals 25, 31, and 33.
      TERMINALS CONTINUITY REFERENCE

      Terminals Continuity
      A B
      Connector Terminal Connector Terminal
      B15 12 M30 33 Yes
      13 31
      14 25
    4. Check continuity between Bluetooth control unit and ground.
    Fig 1: Checking Continuity Between Bluetooth Control Unit And Ground
    G04928633Courtesy of NISSAN MOTOR CO., U.S.A.
    TERMINALS CONTINUITY REFERENCE

    Terminals Continuity
    (+) (-)
    Connector Terminal
    B15 12 Ground No
    13
    14

    OK or NG 

    OK: GO TO 2.

    NG: Repair harness.

  2. CHECK HARNESS
    1. Disconnect audio unit connector M43.
    2. Check continuity between audio unit connector M43 (A) terminals 6, 15, and 16 and Bluetooth control unit connector B15 (B) terminals 17, 19, and 18.
    TERMINALS CONTINUITY REFERENCE

    Terminals Continuity
    (A) (B)
    Connector Terminal Connector Terminal
    M43 6 B15 17 Yes
    15 19
    16 18
    Fig 2: Checking Continuity Between Audio Unit Connector M43 Terminals 6, 15, And 16 And Connector B15 Terminals 17, 19, And 18
    G04928634Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 3.

    NG: Repair harness.

  3. SPIRAL CABLE CHECK
    1. Disconnect spiral cable connector M78.
    2. Check continuity between spiral cable terminals.

      15 - 33 : Continuity should exist. 

      17 - 31 : Continuity should exist. 

      19 - 25 : Continuity should exist. 

    Fig 3: Checking Continuity Between Spiral Cable Terminals
    G04928635Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: GO TO 4.

    NG: Replace spiral cable. Refer to "REMOVAL AND INSTALLATION ".

  4. CHECK STEERING SWITCH RESISTANCE

    Check resistance between spiral cable connector M78 terminals.

    TERMINALS RESISTANCE REFERENCE

    Terminal Signal name Condition Resistance (Ω) (Approx.)
    17 19 Seek (down) Depress Seek down switch. 165
    Phone/Send Depress Phone/Send switch. 0
    Volume (down) Depress volume down switch. 487
    15 19 Seek (up) Depress Seek up switch. 165
    Phone/End Depress Phone/End switch. 0
    Volume (up) Depress volume up switch. 487
    Fig 4: Checking Resistance Between Spiral Cable Connector M78 Terminals
    G04928636Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG 

    OK: Inspection End.

    NG: Replace steering switch. Refer to "REMOVAL AND INSTALLATION ".