Selector Lever Knob Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Insert lock pin (3) to selector lever knob (1).
Install knob cover (2) to selector lever knob (1).
Set selector lever in "N" position.
Install selector lever knob over selector lever until a click is felt.
CAUTION:
- Do not tilt selector lever knob when installing. Install it straight, and do not tap or apply any shock to install it.
- Do not push selector button.
  
  Fig 1: Identifying Lock Pin To Selector Lever Knob