Trouble Diagnosis Symptom Chart
WARNING: This page is about a different car, the 2007 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Always check the "Work Flow" before troubleshooting. Refer to "WORK FLOW ".
- Always check keyfob battery before replacing keyfob.
SYMPTOM CHART
| Symptom | Diagnoses/service procedure |
|---|---|
| All functions of remote keyless entry system do not operate. | 1. CHECK KEYFOB BATTERY AND FUNCTION .
NOTE:
If the result of keyfob function check with CONSULT-III is OK, keyfob is not malfunctioning.
|
| 2. CHECK REMOTE KEYLESS ENTRY RECEIVER . | |
| 3. Refer to ID CODE ENTRY PROCEDURE . | |
| 4. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| The new ID of keyfob cannot be entered. | 1. CHECK KEYFOB BATTERY AND FUNCTION .
NOTE:
If the result of keyfob function check with CONSULT-III is OK, keyfob is not malfunctioning.
|
| 2. CHECK KEY SWITCH . | |
| 3. CHECK DOOR SWITCH . | |
| 4. CHECK ACC SWITCH . | |
| 5. Replace keyfob. Refer to ID CODE ENTRY PROCEDURE . | |
| 6. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| Door lock does not function with keyfob. (Power door lock system is "OK".) | 1. CHECK KEYFOB FUNCTION. (LOCK)
NOTE:
If the result of keyfob function check with CONSULT-III is OK, keyfob is not malfunctioning.
|
| 2. Replace keyfob. Refer to ID CODE ENTRY PROCEDURE . | |
| 3. CHECK DOOR SWITCH . | |
| 4. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| Door unlock does not function with keyfob (Power door lock system is "OK") | 1. CHECK KEYFOB FUNCTION. (UNLOCK)
NOTE:
If the result of keyfob function check with CONSULT-III is OK, keyfob is not malfunctioning.
|
| 2. Replace keyfob. Refer to ID CODE ENTRY PROCEDURE . | |
| 3. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| Hazard reminder does not activate properly when pressing lock or unlock button of keyfob. | 1. CHECK HAZARD REMINDER MODE.* *: Hazard reminder mode can be changed. First check the hazard reminder setting. |
| 2. CHECK HAZARD FUNCTION . | |
| 3. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| Panic alarm does not activate when panic alarm button is continuously pressed. | 1. CHECK PANIC ALARM MODE.* *: Panic alarm mode can be changed. First check the panic alarm setting. |
| 2. CHECK KEYFOB BATTERY AND FUNCTION .
NOTE:
If the result of keyfob function check with CONSULT-III is OK, keyfob is not malfunctioning.
|
|
| 3. CHECK HORN FUNCTION . | |
| 4. CHECK KEY SWITCH . | |
| 5. Replace keyfob. Refer to ID CODE ENTRY PROCEDURE . | |
| 6. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| Trunk lid does not open when trunk opener button is continuously pressed (ignition key must be OFF). | 1. CHECK KEYFOB BATTERY AND FUNCTION .
NOTE:
If the result of keyfob function check with CONSULT-III is OK, keyfob is not malfunctioning.
|
| 2. CHECK TRUNK LID OPENER ACTUATOR . | |
| 3. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| Auto door lock operation does not activate properly. (All other remote keyless entry system functions are OK.) | 1. CHECK AUTO DOOR LOCK OPERATION MODE.* *: Auto door lock operation mode can be changed. First check the auto door lock operation setting. |
| 2. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . | |
| Interior lamp operation does not activate properly. | 1. CHECK INTERIOR LAMP OPERATION . |
| 2. Replace BCM. See REMOVAL AND INSTALLATION OF BCM . |