Method B

WARNING: This page is about a different variant/trim than selected.

Remove ignition coil No. 1.

Fig 1: Removing Ignition Coil No. 1
Courtesy of NISSAN MOTOR CO., U.S.A.
Connect ignition coil No. 1 and spark plug No. 1 with suitable high-tension wire as shown, and attach timing light clamp to this wire.

Fig 2: Spark Plug High-Tension Wire
Courtesy of NISSAN MOTOR CO., U.S.A.
Check ignition timing.

Fig 3: Identifying Ignition Timing Marks On Crankshaft Pulley
Courtesy of NISSAN MOTOR CO., U.S.A.