Inspection Procedure

Turn ignition switch OFF.
Connect GST to data link connector, which is located under LH dash panel near the hood opener handle.

Fig 1: Locating Data Link Connector
Courtesy of NISSAN NORTH AMERICA, INC.
Turn ignition switch ON.
Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens in this section, sample screens are shown.)

Fig 2: GST Screens - VYX GENERIC OBC II PROGRAM CARD
Courtesy of NISSAN NORTH AMERICA, INC.
Perform each diagnostic mode according to each service procedure.

Fig 3: GST SCREENS - READINESS TESTS
Courtesy of NISSAN NORTH AMERICA, INC.

For further information, see the GST Operation Manual of the tool maker .