LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Altima SE-R, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Component Testing (VQ35DE) >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    Fig 1: Checking Continuity Between Terminals No. 1 & 2
    G04101963Courtesy of NISSAN MOTOR CO., U.S.A.
    CONTINUITY SPECIFICATION

    Condition Continuity
    Brake pedal: Fully released Should exist
    Brake pedal: Slightly depressed Should not exist

    If NG, adjust ASCD brake switch installation, Refer to , "BRAKE PEDAL ", and perform step  3 again.

scientia non olet · About LEMON Manuals