Operation Procedure
- Touch "REAR DEFOGGER" on the "SELECT TEST ITEM" screen.
- Touch "DATA MONITOR" on the "SELECT DIAG MODE" screen.
- Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.ALL SIGNAL MONITORS ALL ITEM SPECIFICATION
ALL SIGNALS Monitors all items. SELECTION FROM MENU Selects and monitors only the specified item. - Touch "START".
- If "SELECTION FROM MENU" is selected, touch the item desired to monitor. If "ALL SIGNALS" is selected, all items are monitored.
- During monitoring, touching "COPY" will print the monitored item status.