CONSULT-II Function (BCM): Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
BCM DIAGNOSTIC TEST ITEM SPECIFICATION
| BCM diagnostic test item | Diagnostic mode | Content |
|---|---|---|
| Inspection by part | WORK SUPPORT | Changes setting of each function. |
| DATA MONITOR | Displays BCM input/output data in real time. | |
| ACTIVE TEST | Operation of electrical loads can be checked by sending drive signal to them. | |
| SELF-DIAG RESULTS | Displays BCM self-diagnosis results. | |
| CAN DIAG SUPPORT MNTR | The results of transmit/receive diagnosis of CAN communication can be read. | |
| ECU PART NUMBER | BCM part number can be read. | |
| CONFIGURATION | Performs BCM configuration read/write functions. |