System Description: Function
ITEM DESCRIPTION
| Item | Description |
|---|---|
| Ignition key warning chime | Sounds warning chime when driver's door is opened with key in ignition key cylinder and ignition switch "OFF" or "ACC" position. |
| Light warning chime | Sounds warning chime when driver's door is opened with lighting switch in the 1st or 2nd position and the key removed from the ignition switch. |
| Seat belt warning chime | Sounds warning chime for approximately 6 seconds after ignition switch is turned "ON" when driver seat belt is unfastened. |
NOTE:
When ignition key warning chime, light warning chime, and seat belt warning chime should be performed at the same time, the priorities for each chime are the following.
- Seat belt warning chime
- Ignition key warning chime
- Light warning chime
Power is supplied at all times
- through 50A fusible link (letter f, located in the fuse and fusible link box)
- to BCM terminal 70, and
- through 10A fuse [No. 21, located in the fuse block (J/B)]
- to key switch and key lock solenoid terminal 3.
Ground is supplied
- to BCM terminal 67
- through body grounds M57, M61, and F14.
When the proper signal, or combination of signals, is received by the combination meter, the warning chime will sound.