Transfer Control Unit Terminals And Reference Value
Data are reference value and are measured between each terminal and ground.
WIRE COLOR AND TERMINAL DESCRIPTION
| Terminal | Wire color | Item | Condition | Data (Approx.) | |
|---|---|---|---|---|---|
| 40 | L | ATP switch |
|
4WD shift switch: 4H to 4LO or 4LO to 4H (While actuator motor is operating.) | 0V |
| Except the above | Battery voltage | ||||
CAUTION:
When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.