Consult-II Reference Value In Data Monitor Mode
Data are reference value.
MONITORED ITEM REFERENCE
| Monitored item [Unit] | Content | Condition | Display value | |
|---|---|---|---|---|
| SHIFT AC MON1 [ON/OFF] | Check signal for transfer control unit signal output |
|
4WD shift switch: 4H to 4LO ("Wait" function is operating.) | ON |
| Except the above | OFF | |||
| SHIFT AC MON2 [ON/OFF] | Check signal for transfer control unit signal output |
|
4WD shift switch: 4LO to 4H ("Wait" function is operating.) | ON |
| Except the above | OFF | |||