April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

CHECK LOAD SIGNAL CIRCUIT OVERALL FUNCTION-II

Turn ignition switch ON.
Connect CONSULT-II and select "DATA MONITOR" mode.

Select "LOAD SIGNAL" and check indication under the following conditions.

LIGHTING SWITCH POSITION

Condition	Indication
Lighting switch: ON at 2nd position	ON
Lighting switch: OFF	OFF

OK or NG

OK : INSPECTION END

NG : GO TO 2.

CHECK HEADLAMP SYSTEM

Fig 1: Consult-II DATA MONITOR Display Screen
Courtesy of NISSAN MOTOR CO., U.S.A.

Refer to "HEADLAMP (FOR USA) " or "HEADLAMP (FOR CANADA) - DAYTIME LIGHT SYSTEM - ".

: INSPECTION END