LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Maxima SL >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - Introduction >> On Board Diagnostic (OBD) System >> Emission-related Diagnostic Information >> System Readiness Test (SRT) Code >> How to Display SRT Status >> No Tools
April 5, 2026: LEMON Manuals is launched! Read the announcement.

No Tools

A SRT code itself can not be displayed while only SRT status can be.

  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown in Fig 1.
    • When all SRT codes are set, MIL lights up continuously.
    • When any SRT codes are not set, MIL will flash periodically for 10 seconds.
    Fig 1: Identifying SRT Status
    G04160090Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals