Diagnostic Trouble Code (DTC) Confirmation Procedure: Notes

After the repair, perform the following procedure to confirm the malfunction is eliminated.

WITH CONSULT-II 

1. Start engine.
2. Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
   Fig 1: Consult-II SELECT SYSTEM Display Screen

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Drive vehicle under the following conditions:

   Selector lever in D, vehicle speed higher than 20 km/h (12 MPH).

   Fig 2: Consult-II SELECT DIAG MODE Display Screen

   Courtesy of NISSAN MOTOR CO., U.S.A.