LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Engine Control System - Component Testing (Qr25DE)) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch (For M/T Models)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Clutch Switch (For M/T Models)

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    ASCD CLUTCH SWITCH CONDITIONS AND CONTINUITY REFERENCE

    Condition Continuity
    Clutch pedal: Fully released. Should exist.
    Clutch pedal: Slightly depressed. Should not exist.

    If NG, adjust ASCD clutch switch installation. Refer to CLUTCH SYSTEM . Perform step 3 again.