LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2006 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1148 To P2A00 (Qr25DE) >> DTC P2138 App Sensor >> CONSULT-II Reference Value in Data Monitor Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CONSULT-II Reference Value in Data Monitor Mode

Specification data are reference values.

MONITOR ITEM AND SPECIFICATION

MONITOR ITEM CONDITION SPECIFICATION
ACCEL SEN 1
  • Ignition switch: ON

    (Engine stopped)

  • Shift lever: D (A/T), 1ST (M/T)
 Accelerator pedal: Fully released 0.65 - 0.87V
Accelerator pedal: Fully depressed More than 4.3V
ACCEL SEN 2(1)
  • Ignition switch: ON

    (Engine stopped)

  • Shift lever: D (A/T), 1ST (M/T)
 Accelerator pedal: Fully released 0.56 - 0.96V
Accelerator pedal: Fully depressed More than 4.0V
CLSD THL POS
  • Ignition switch: ON

    (Engine stopped)

 Accelerator pedal: Fully released ON
Accelerator pedal: Slightly depressed OFF
(1) Accelerator pedal position sensor 2 signal is converted by ECM internally. Thus, it differs from ECM terminals voltage signal.
scientia non olet · About LEMON Manuals