Fuel Pressure Release

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Turn ignition switch ON.
Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-II.

Fig 1: FUEL PRESSURE RELEASE In WORK SUPPORT Mode - CONSULT-II Screen Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Start engine.
After engine stalls, crank it 2 or 3 times to release all fuel pressure.
Turn ignition switch OFF.

Without CONSULT-II

Remove fuel pump fuse.

Fig 2: Identifying Fuel Pump Fuse Location
Courtesy of NISSAN MOTOR CO., U.S.A.
Start engine.
After engine stalls, crank it 2 or 3 times to release all fuel pressure.
Turn ignition switch OFF.
Reinstall fuel pump fuse after servicing fuel system.