System Description
WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all times
- through 10A fuse (No. 38, located in the fuse and fusible link box)
- to lighting switch terminal 11.
With the ignition switch in the ACC or ON position, power is supplied
- through 10A fuse [No. 1, located in the fuse block (J/B)]
- to CD auto changer (if equipped) terminal 6.
The lighting switch must be in parking lamp (1ST) or headlamp "ON" (2ND) position for illumination. The illumination control switch controls the amount of current to the illumination system. As the amount of current increases, the illumination becomes brighter.
The following chart shows the power and ground connector terminals for the components included in the illumination system.
POWER TERMINAL CONNECTOR SPECIFICATION
| Component | Connector No. | Power terminal | Ground terminal | ||
|---|---|---|---|---|---|
| Illumination control switch | M22 | 1 | 3 | ||
| Combination meter | M29 or M30 | 16 or 33 | 17,33 or 34 | ||
| Hazard switch | M43 | 7 | 8 | ||
| Air control | M32 | 2 | 6 | ||
| A/T device indicator(1) | M44 | 3 | 4 | ||
| Main power window and door lock/unlock switch(1) | D6 | 4 | 2 | ||
| Audio unit | M45 | 8 | 7 | ||
| CD auto changer | M71 | 6 | 5 | ||
|
|||||
The ground for all of the components is controlled through terminals 2 and 3 of the illumination control switch to body grounds M28 and M54.