Overall Function Check

WARNING: This page is about a different car, the 2005 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Use this procedure to check the overall function of the park/neutral position switch circuit. During this check, a 1st trip DTC might not be confirmed.

WITHOUT CONSULT-II

Turn ignition switch ON.

Check voltage between ECM terminal 102 (PNP switch signal) and ground under the following conditions.

Fig 1: Checking Voltage Between ECM Connector Terminal 102 & Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

DTC P1706 CONFIRMATION PROCEDURE CONDITIONS (WITHOUT CONSULT-II)

Condition (Gear position)	Voltage (V) (Known-good data)
P or N position (A/T models) Neutral position (M/T models)	Approx. 0
Except the above position	A/T models: Battery voltage M/T models: Approximately 5V

If NG, go to DIAGNOSTIC PROCEDURE .