DTC Index
DTC INDEX
| CONSULT-III display | Fail-safe | TIMENOTE | |
|---|---|---|---|
| No DTC is detected. further testing may be required. | - | - | - |
| U1000: CAN COMM CIRCUIT | x | CRNT | 1-39 |
| B2098: IGN RELAY ON | x | CRNT | 1-39 |
| B2099: IGN RELAY OFF | - | CRNT | 1-39 |
| B2108: STRG LCK RELAY ON | - | CRNT | 1-39 |
| B2109: STRG LCK RELAY OFF | - | CRNT | 1-39 |
| B210A: STRG LCK STATE SW | - | CRNT | 1-39 |
| B210B: START CONT RLY ON | - | CRNT | 1-39 |
| B210C: START CONT RLY OFF | - | CRNT | 1-39 |
| B210D: STARTER RELAY ON | - | CRNT | 1-39 |
| B210E: STARTER RELAY OFF | - | CRNT | 1-39 |
| B210F: INTRLCK/PNP SW ON | - | CRNT | 1-39 |
| B2110: INTRLCK/PNP SW OFF | - | CRNT | 1-39 |
NOTE:
The details of TIME display are as follows.
- CRNT: The malfunctions that are detected now
- 1-39: The number is indicated when it is normal at present and a malfunction was detected in the past. It increases like 0 → 1 → 2. .. 38 → 39 after returning to the normal condition whenever IGN OFF → ON. It is fixed to 39 until the self-diagnosis results are erased if it is over 39. It returns to 0 when a malfunction is detected again in the process.