DTC Detection Logic
NOTE:
- If DTC B210B is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC ".
- If DTC B210B is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC ".
DTC DETECTING CONDITION POSSIBLE CAUSE
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B210B |
START CONT RLY ON |
IPDM E/R detects that the relay is stuck at ON position even if the followings condition are met for about 1 second.
- Starter control relay ON/OFF signal from BCM
- Clutch interlock or shift park neutral position (PNP) switch input signal
|
|