LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Altima Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Security Control System (Except Hybrid) >> Intelligent Key System >> Ecu Diagnosis >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Reference Value >> Physical Values
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Physical Values

TERMINAL DESCRIPTION CHART

Terminal No. (Wire color) Description Condition Value (Approx.)
+ -
Signal name Input/Output
1 (R) Ground Battery power supply Input Ignition switch OFF Battery voltage
2 (B/Y) Ground Battery power supply Input Ignition switch OFF Battery voltage
4 (L/R) Ground Front wiper LO Output Ignition switch ON Front wiper switch OFF 0 V
Front wiper switch LO Battery voltage
5 (L/B) Ground Front wiper HI Output Ignition switch ON Front wiper switch OFF 0 V
Front wiper switch HI Battery voltage
6 (SB) Ground Daytime light relay power supply (Canada models only) Output Ignition switch OFF Battery voltage
7 (R/L) Ground Tail, license plate lamps & interior lamps Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 1ST Battery voltage
10 (R/B) Ground ECM relay power supply Output Ignition switch OFF (For a few seconds after turning ignition switch OFF) 0 V
  • Ignition switch ON
  • Ignition switch OFF (More than a few seconds after turning ignition switch OFF)
 Battery voltage
11 (P/L) Ground Steering lock unit power supply Output Ignition switch OFF A few seconds after opening the driver door Battery voltage
Ignition switch LOCK Press the push-button ignition switch Battery voltage
Ignition switch ACC or ON 0 V
12 (B) Ground Ground - Ignition switch ON 0 V
13 (W) Ground Fuel pump power supply Output Approximately 1 second or more after turning the ignition switch ON 0 V
  • Approximately 1 second after turning the ignition switch ON
  • Engine running
 Battery voltage
15 (G/W) Ground Ignition relay-1 power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
16 (L/Y) Ground Front wiper auto stop Input Ignition switch ON Front wiper stop position 0 V
Any position other than front wiper stop position Battery voltage
19 (L/Y) Ground Ignition relay-1 power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
25 (GR) Ground Ignition relay-1 power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
27 (BR/W) Ground Ignition relay monitor Input Ignition switch OFF or ACC Battery voltage
Ignition switch ON 0 V
28 (BR) Ground Push-button ignition switch Input Press the push-button ignition switch 0 V
Release the push-button ignition switch Battery voltage
30 (R/B) Ground Starter relay control Input CVT models CVT selector lever in any position other than P or N (ignition switch ON) 0 V
CVT selector lever P or N (ignition switch ON) Battery voltage
M/T models Release the clutch pedal 0 V
Depress the clutch pedal Battery voltage
32 (O/L) Ground Electronic steering column lock unit condition-1 Input Electronic steering column lock is activated 0 V
Electronic steering column lock is deactivated Battery voltage
33 (G/R) Ground Electronic steering column lock unit condition-2 Input Electronic steering column lock is activated Battery voltage
Electronic steering column lock is deactivated 0 V
34 (BR/W) Ground Cooling fan relay-3 control Input Ignition switch OFF or ACC 0 V
Ignition switch ON 0.7 V
35 (L/B) Ground Cooling fan motor control Output Ignition switch OFF or ACC 0 V
Ignition switch ON 0.7 V
36 (G) Ground Battery power supply Input Ignition switch OFF Battery voltage
38 (R/W) Ground Cooling fan motor control Output Ignition switch OFF or ACC 0 V
Ignition switch ON 0.7 V
39 (P) - CAN-L Input/Output - -
40 (L) - CAN-H Input/Output - -
41 (B) Ground Ground - Ignition switch ON 0 V
42 (SB) Ground Cooling fan relay-2 control Input Ignition switch OFF or ACC 0 V
Ignition switch ON 0.7 V
43 (G/B) Ground CVT device (Detention switch) Input Ignition switch ON Press the CVT selector button (CVT selector lever P) Battery voltage
  • CVT selector lever in any position other than P
  • Release the CVT selector button (CVT selector lever P)
 0 V
44 (G/W) Ground Horn relay control Input The horn is deactivated Battery voltage
The horn is activated 0 V
45 (L/O) Ground Anti theft horn relay control Input The horn is deactivated Battery voltage
The horn is activated 0 V
46 (R) Ground Starter relay control Input CVT models CVT selector lever in any position other than P or N (ignition switch ON) 0 V
CVT selector lever P or N (ignition switch ON) Battery voltage
M/T models Release the clutch pedal 0 V
Depress the clutch pedal Battery voltage
48 (Y/R) Ground A/C relay power supply Output Engine running A/C switch OFF 0 V
A/C switch ON (A/C compressor is operating) Battery voltage
49 (R/B) Ground ECM relay power supply Output Ignition switch OFF (For a few seconds after turning ignition switch OFF) 0 V
  • Ignition switch ON
  • Ignition switch OFF (More than a few seconds after turning ignition switch OFF)
 Battery voltage
51 (LG) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
52 (Y/G) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
53 (R/B) Ground ECM relay power supply Output Ignition switch OFF (For a few seconds after turning ignition switch OFF) 0 V
  • Ignition switch ON
  • Ignition switch OFF (More than a few seconds after turning ignition switch OFF)
 Battery voltage
54 (G/W) Ground Throttle control motor relay power supply Output Ignition switch OFF (For a few seconds after turning ignition switch OFF) 0 V
  • Ignition switch ON
  • Ignition switch OFF (More than a few seconds after turning ignition switch OFF)
 Battery voltage
55 (W/L) Ground ECM power supply Output Ignition switch OFF Battery voltage
56 (R/Y) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
57 (O) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
58 (Y) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
69 (W/B) Ground ECM relay control Output Ignition switch OFF (For a few seconds after turning ignition switch OFF) Battery voltage
  • Ignition switch ON
  • Ignition switch OFF (More than a few seconds after turning ignition switch OFF)
 0-1.5 V
70 (O) Ground Throttle control motor relay control Output Ignition switch ON --> OFF 0-1.0 V
↓
Battery voltage
↓
0 V
Ignition switch ON 0-1.0 V
72 (R/B) Ground PNP switch signal Input Ignition switch ON CVT selector lever in P or N position Battery voltage
CVT selector lever in any position other than P or N position 0 V
74 (Y) Ground Ignition relay power supply Output Ignition switch OFF 0 V
Ignition switch ON Battery voltage
75 (P/L) Ground Oil pressure switch Input Ignition switch ON Engine stopped 0 V
Engine running Battery voltage
76 (GR) Ground Power generation command signal Output Ignition switch ON
G04888409
40% is set on "Active test", "ALTERNATOR DUTY" of "ENGINE"
G04888410
80% is set on "Active test", "ALTERNATOR DUTY" of "ENGINE"
G04888411
77 (B/R) Ground Fuel pump relay control Output
  • Approximately 1 second after turning the ignition switch ON
  • Engine running
 0-1.0 V
Approximately 1 second or more after turning the ignition switch ON Battery voltage
80 (B/W) Ground Starter motor Output At engine cranking Battery voltage
83 (R/Y) Ground Headlamp LO (RH) Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 2ND Battery voltage
84 (L) Ground Headlamp LO (LH) Output Ignition switch ON Lighting switch OFF 0 V
Lighting switch 2ND Battery voltage
86 (W/R) Ground Front fog lamp (RH) Output Lighting switch 2ND
  • Front fog lamp switch ON
  • Daytime running light activated (Only for Canada models)
 Battery voltage
Front fog lamp switch OFF 0 V
87 (L/Y) Ground Front fog lamp (LH) Output Lighting switch 2ND
  • Front fog lamp switch ON
  • Daytime running light activated (Only for Canada models)
 Battery voltage
Front fog lamp switch OFF 0 V
88 (R/W) Ground Washer pump power supply Output Ignition switch ON Battery voltage
89 (L/W) Ground Headlamp HI (RH) Output Ignition switch ON
  • Lighting switch HI
  • lighting switch PASS
 Battery voltage
Lighting switch OFF 0 V
90 (G) Ground Headlamp HI (LH) Output Ignition switch ON
  • Lighting switch HI
  • Lighting switch PASS
 Battery voltage
Lighting switch OFF 0 V
91 (LG/R) Ground Parking lamp (RH) Output Ignition switch ON Lighting switch 1ST Battery voltage
Lighting switch OFF 0 V
92 (LG/B) Ground Parking lamp (LH) Output Ignition switch ON Lighting switch 1ST Battery voltage
Lighting switch OFF 0 V
105 (V) Ground Daytime light relay control Output Ignition switch ON Daytime light system active Battery voltage
Ignition switch ON Daytime light system inactive 0 V
scientia non olet · About LEMON Manuals