Diagnostic Procedure

1. Turn ignition switch ON.
2. Connect CONSULT-II and select "DATA MONITOR" mode.
3. Select "LOAD SIGNAL" and check indication under the following conditions.
   CONSULT-II FUNCTIONS REFERENCE
   
   

   Condition	Indication
   Lighting switch: ON at 2nd position	ON
   Lighting switch: OFF	OFF

OK or NG 

OK: INSPECTION END 

NG: GO TO 2.

Fig 1: CONSULT-II Display - DATA MONITOR

Courtesy of NISSAN NORTH AMERICA, INC.

Refer to "HEADLAMP (FOR USA) " or "HEADLAMP (FOR CANADA) - DAYTIME LIGHT SYSTEM ".

: INSPECTION END