April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

CHECK SELF-DIAGNOSTIC RESULTS

Check self-diagnostic results.

SELF-DIAGNOSTIC RESULTS REFERENCE

Self-diagnostic results
ENGINE SIGNAL 1
ENGINE SIGNAL 2
ENGINE SIGNAL 3
ENGINE SIGNAL 4
ENGINE SIGNAL 6

Is above displayed in the self-diagnosis display?

Yes: GO TO 2.

NO: INSPECTION END

CHECK ENGINE SYSTEM
1. Perform an ECM self-diagnosis and repair or replace any malfunction items. Perform the ECM self-diagnosis again.
2. Perform ABS actuator and electric unit (control unit) self-diagnosis again.
OK or NG

OK: INSPECTION END

NG >>
- Repair or replace malfunctioning components.
- Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".