Diagnostic Procedure

CHECK LOAD SIGNAL CIRCUIT OVERALL FUNCTION-I

Select "LOAD SIGNAL" and check indication under the following conditions.

DATA MONITOR REFERENCE

Condition	Indication
Rear window defogger switch: ON	ON
Rear window defogger switch: OFF	OFF

OK or NG

OK: GO TO 2.

NG: GO TO 4.

Fig 1: CONSULT-II Display - Data Monitor

Courtesy of NISSAN NORTH AMERICA, INC.

CHECK LOAD SIGNAL CIRCUIT OVERALL FUNCTION-II

Check "LOAD SIGNAL" indication under the following conditions.

LOAD SIGNAL REFERENCE

Condition	Indication
Lighting switch: ON at 2nd position	ON
Lighting switch: OFF	OFF

OK or NG

OK: GO TO 3.

NG: GO TO 5.

Fig 2: CONSULT-II Display - Data Monitor

Courtesy of NISSAN NORTH AMERICA, INC.

CHECK HEATER FAN SIGNAL CIRCUIT OVERALL FUNCTION

Check "HEATER FAN SW" in "DATA MONITOR" mode with CONSULT-II under the following conditions.

HEATER FAN SW REFERENCE

Condition	LOAD SIGNAL
Heater fan control switch: ON	ON
Heater fan control switch: OFF	OFF

OK or NG

OK: INSPECTION END.

NG: GO TO 6.

Fig 3: CONSULT-II Display - Data Monitor

Courtesy of NISSAN NORTH AMERICA, INC.

CHECK REAR WINDOW DEFOGGER SYSTEM
Refer to , "REAR WINDOW DEFOGGER ".

: INSPECTION END
CHECK HEADLAMP SYSTEM
Refer to , "HEADLAMP - XENON TYPE - " or LT-37, "HEADLAMP - CONVENTIONAL TYPE-".

: INSPECTION END
CHECK HEATER FAN CONTROL SYSTEM
Refer to , "TROUBLE DIAGNOSIS ".

: INSPECTION END