Mid Level System: Notes
Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times
- through 20A fuse [No. 31, located in the fuse and fusible link box]
- to audio unit terminal 6 and
- through 15A fuse [No. 19, located in the fuse block (J/B)]
- to AV switch terminal 1 and
- to display unit terminal 1 (with monochrome display) or display control unit terminal 1 (with color display).
With the ignition switch in the ACC or ON position, power is supplied
- through 10A fuse [No. 4, located in the fuse block (J/B)]
- to audio unit terminal 10 and
- to AV switch terminal 2 and
- to display unit terminal 2 (with monochrome display) or display control unit terminal 10 (with color display).
With the ignition switch in the ON or START position, power is supplied
- through 10A fuse [No. 12, located in the fuse block (J/B)]
- to display unit terminal 3 (with monochrome display) or display control unit terminal 12 (with color display).
Ground is supplied through the case of the audio unit.
Ground is also supplied
- to AV switch terminal 5 and
- to display unit terminal 6 (with monochrome display) or display control unit terminal 3 (with color display).
- through body grounds M57, M61 and M79.
Then audio signals are supplied
- through audio unit terminals 1, 2, 3, 4, 13, 14, 15 and 16
- to terminals + and - of front door speaker LH and RH
- to terminals + and - of front tweeter LH and RH
- to terminals + and - of rear speaker LH and RH
- to terminals + and - of rear tweeter LH and RH.