LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Quest SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Basic Service Procedure >> Idle Speed and Ignition Timing Check >> Ignition Timing >> Method B
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Method B

  1. Remove No. 1 ignition coil.
    Fig 1: Attaching Timing Light To Ignition Coil Wires
    G04905113Courtesy of NISSAN NORTH AMERICA, INC.
  2. Connect No. 1 ignition coil and spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.
    Fig 2: Identifying Ignition Coil And Spark Plug With Suitable High-Tension Wire
    G04905116Courtesy of NISSAN NORTH AMERICA, INC.
    Fig 3: Identifying Exhaust Pipe Dimension
    G04894500Courtesy of NISSAN NORTH AMERICA, INC.
  3. Check ignition timing.
    Fig 4: Checking Ignition Timing
    G04886361Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals