Steering Column: Installation

WARNING: This page is about a different car, the 2006 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse order of removal.
- When installing steering column, finger tighten all lower bracket and clamp retaining bolts; then tighten them securely. Do not apply undue stress to steering column.
- When attaching coupling joint, be sure tightening bolt faces cutout portion.
  
  Fig 1: Attaching Coupling Joint
  Courtesy of NISSAN MOTOR CO., U.S.A.
- Align slit of lower joint with projection on dust cover. Insert joint until surface A contacts surface B.
  
  Fig 2: Aligning Slit Of Coupling Joint With Projection On Dust Cover
  Courtesy of NISSAN MOTOR CO., U.S.A.
  
  CAUTION: After installation, turn steering wheel to make sure it moves smoothly. Ensure the number of turns are the same from the straight forward position to left and right locks. Be sure that the steering wheel is in a neutral position when driving straight ahead.